One day you switch on the air conditioner of your bedroom and find it not working. It’s one of the most unbearable situations in sultry summertime. Summer is truly that time of the year when you’ll probably be running your AC frequently. Even if getting your AC fixed is not challenging, waiting for it to get repaired isn’t easy! To save enough time it’s better you understand the common causes of AC malfunctioning. This way, you can call up air conditioner Arlington TX professionals on time.
Table of Contents
Filter
Dirty or clogged filter pores are the most common causes of air conditioners not working correctly. Dirty filters decrease the airflow and freeze the AC unit.
Sometimes it means time to change your air filter. However, filters are often reusable, which means you can clean them when they’re dirty. You can check if filters are clogged or not bypassing the torchlight through them. You need to clean them if the light fails to pass.
Water Leakage
Water leakage in the indoor unit of your AC happens if fungi, mildew, or algae blocks the condensate drain of the AC. As a result, water returns right into your room through the pipe. Another reason can be a broken condensate pump that needs to be replaced.
On the other hand, water pools under the AC’s compressor during a hot and humid day. This problem can occur due to improper installation, broken condensate pan, low-quality AC seal, among others. Such conditions need to be diagnosed immediately by a professional at air conditioner Arlington TX.
Low Refrigerant
The sign of a low refrigerant is fluctuating indoor air temperature. As the AC stops using refrigerant, the coolant starts leaking, and it’ll work absurdly.
Thus, your air conditioner requires a Freon recharge by an air conditioner Arlington TX service provider. The professional will find out the leak’s location to provide the right repair service and determine the cost of the repair.
Controls Failure
The compressor and fan start malfunctioning because of frequently turning on and off your air conditioner. The parts create an electrical connection to start the AC unit. But when there’s a connection problem, the motor and compressor will not start.
So, diagnosis of the electrical connections is crucial to resolve the issue.
Capacitors of Air Conditioner
Start capacitor activates the AC motor that further enables the compressor and fans to work. Thus, your air conditioner stops running due to a defective capacitor.
Spin the fan blades clockwise. Freely spinning blades is a sign of a faulty capacitor.
Noisy Unit of Air Conditioner
When your AC starts making an unusual noise, it can be because of several reasons. Different sounds indicate different problems in your AC unit.
Often an inappropriately aligned or faulty belt leads to a squealing sound. But generally, motor bearings have a problem if your AC is making a grinding noise. Further, you’ve to get cover panels tightened when you hear rattling sounds from your AC. Besides, a popping sound means an unfastened metal flap in the ductwork needs fixing.
